- 產(chǎn)品詳情
Introduction and features:
This equipment is developed for 500mm roll products, whose expansion and contraction are difficult to control. The equipment uses Japanese high-precision tools to cut and roll 500mm wide products to ensure that there is no fluffy edge after sub-rolling; to ensure the accuracy of covering film lamination and solder mask exposure accuracy in the post-process.
Features:
? After slitting: accurate accuracy.
? After slitting: no wave pattern.
? After slitting: no copper chips.
? After slitting: the material is collected neatly.
? Copper foil slitting: one is divided into two.
? PI.EMI, CVL can be divided into three or four.
Basic specifications of the machine:
project | Specification |
Input voltage | AC220V / 50HZ / 5KW |
Maximum machine size | 2,350mm(L)×1350mm(W)×1800mm(H) |
Pneumatic pressure | Ψ12, 5kg/cm2. Air consumption 20L/min |
Gross weight | 1200kg |
Cut size | 500mm/520mm cut to 250mm/260mm |
Cutting speed | 0.5-5m/min |
* Equipment design and specifications can be adjusted to improve equipment performance.